Remote Wake Up 1 2 0

Posted on  by
  • To allow remote wake-up, enable the setting that corresponds to your adapter connection. Systems using an ACPI-aware OS (such as Windows. XP) can power up the system from a power off state. You can power up the system by enabling ACPI-specific settings such as Wake-on-LAN from S5.
  • Sunlogin is a free remote control application that supports remote power-on, remote desktop and NAT traversal. With customized transmit protocol that is registered as an Intellectual Property and SSL/AES 256bits data encryption, efficiency and security are both guaranteed throughout your usage.

Wake-on-LAN (WOL) is an Ethernet networking standard that allows a shut down computer to be turned on remotely. Most recent motherboards that have an integrated Ethernet controller support this feature. You can enable the Wake-on-LAN feature in the Power Management section of the motherboard’s BIOS. Wake-on-LAN can turn on a computer on the same local area network or at another location via the internet.

This is how Wake-on-LAN works; the target computer is shut down with enough power reserved only for the network adapter to function. It listens for a small piece of incoming data called the “magic packet”. When the network adapter receives a valid magic packet, the computer starts up. This packet of data is 102 bytes consisting of “FF FF FF FF FF FF” followed by 16 repetitions of the listening network device’s MAC address.

How To Configure Wake On WAN on Windows. Using WOW (Wake On WAN) it is possible to wake up your computer using the Unified Remote app from a mobile data connection. It is the same as WOL (Wake On LAN) however not on your home network. This requires some configuration as described below. Wake-On-LAN Online. This webpage is able to send the required packet data to your computer over the internet. A useful feature is the scheduler that allows you to send the magic packet on a specific day and time up to a week in advance. Enter the external IP address and MAC address of the target computer into the boxes. Then press “Wake Up my.

Wake-on-LAN starts the computer from its “off” state and is like pressing the power button to turn it on and boot up as normal. It’s not to be confused with waking the computer up from standby or sleep. Here are several ways you can turn on a computer using Wake-on-LAN from within your local network or remotely over the internet.

Wake-on-LAN over the Local Area Network

These tools will allow you to send the magic packet and start another computer in your local network.

1. Nirsoft WakeMeOnLan

WakeMeOnLan is another useful and portable utility from NirSoft that displays a list of computers on the network and allows you to switch one or all of them on with the click of a button. Scan the network by pressing F5 and it will display all connected computers. For a computer you want to send the magic packet to, either make sure it’s on before scanning or add it manually from the File menu (Ctrl+N).

Select the computer to start and click the Wake button (F8). The list of computers is saved and will be loaded the next time you start the program. Options like changing the port, sending the magic packet xx times, and the broadcast address can be changed in the settings. WakeMeOnLan has command line options and a computer can be started by either its IP address, name, MAC address or even the predefined text description you give it.

Download WakeMeOnLan

2. WakeOnLANx

WakeonLANx is a compact and portable tool that can perform a number of tasks in addition to Wake-on-LAN. These include pinging target computers, remote reboot/shutdown, retrieving last boot time, getting drive space usage or service status, starting a remote desktop connection, and creating a schedule for remote startups and shutdowns.

Adding a remote computer is not automatic and you have to do it manually. Click the Add button and supply either a MAC address only or IP address and then MAC address on the same line. Make sure to put a hash (#) before any MAC. For example, “#00-24-75-41-4F-9A” or “192.168.0.10#00-24-75-41-4F-9A” will work. The broadcast address and port can be changed by right clicking on any of the entries.

Download WakeOnLANx

3. FUSION WOL

This free utility dates back to 2005 but still works well. We’re not sure why it comes only as an installer because FUSION WOL is a 125KB standalone executable. As the tool has pretty much been abandoned by its developer, we’ve zipped up the file (and its help PDF) to make it portable.

You only need to supply a MAC address to turn on another computer. If you don’t know what that is, supply the IP address and click Get MAC. FUSION WOL has the ability to get the MAC address from an IP address, even if the target computer is off. The password box can be left blank unless you know one is needed. Entering an IP address at the bottom will tell you if the target computer is currently on or off.

Download Fusion WOL (Portable)

Wake-on-LAN over the Internet (Wake-on-WAN)

Make sure to configure your router to forward the required UDP port to the computer that you want to boot up or it will not work. Using a port such as 9 or 7 is recommended although you can use almost any port you wish. Refer to PortForward.com on how to configure port forwarding for your router.

4. Depicus Wake on Lan

Depicus Wake on Lan is a small and portable tool that is able to boot up a computer using Wake-on-LAN over the internet or over the local network.

Simply select Internet or Local subnet from the dropdown and enter the MAC address, IP address or host name, subnet mask (usually 255.255.255.255), and the port. If you are using Wake-on-LAN locally the internet address box doesn’t need to be filled.

Download Depicus Wake on Lan

5. SoftPerfect Network Scanner

Sadly, Network Scanner went full shareware back in 2016 but the previous freeware version still works fine. This tool can perform a number of tasks such as scanning, pinging and getting detailed information about remote computers, discovering shared folders, and remote standby/shutdown. WOL is done via the Wake-on-LAN Manager, which you can get to from the toolbar or the Options menu.

To Wake-on-LAN via the internet, click Add and choose IPv4, enter the MAC address of the target computer, its external IP address and the port. Enter a host name instead of an IP address if you chose that option. To start a local computer you only have to add the MAC address and port, the target host can be left alone. You can also wake up a single computer with just its MAC address from the bottom of the WOL Manager.

Download SoftPerfect Network Scanner (Freeware version)

If you’re unable to remotely turn on your computer using any of the tools listed above, you need to make sure that your computer is Wake-On-LAN ready by checking your system settings. There’s also 5 more ways to remotely turn on a computer with Wake-on-LAN. Find out more on page 2.

12Next › View All

You might also like:

5 Ways to Protect Your Computer Against NetCut’s ARP Spoofing Attack5 Tools to Automatically Wake Up Windows From Standby and Hibernation5 Ways to Remotely Start and Stop Services over the Network5 Ways to Remotely Access Apple Mac OS X from Windows5 Ways to Kill and View Processes on a Remote Computer

Additionally, tools like Teamviewer, R-HUB remote support servers etc. also provide remotely turning on and accessing the computers. You can use the same.

Reply
Apostol Dorel1 year ago

How you can wake up on LAN your PC if you’re not in the same network?

Reply

Page 2 might help you with that, those options can WOL over the internet which is essentially the same thing.

Reply
dan2 years ago

this is “8 programms to use wake-on-lan to turn your computer on” describing exactly ONE way (WOL) – it is not 8 ways to turn a computer on … grrr :-P

Reply

We called it 8 ways to… because there are not 8 programs or 8 websites, but a mixture. And you only have so many characters for a title.

Reply
F4CKAU1 year ago

turn on and wake up is 2 completely different things.. thats what he meant. Its clickbait in essence xD

Reply

Wake on LAN will “turn on” your computer from off, wake up brings the computer out of sleep/standby. Two different things but “wake” is used for both.

Also, the commenter above did not mean the difference between turn on and wake, he was unhappy that the title says “8 ways…” when he believes there’s only one way mentioned.

Reply
tehhellhound2 years ago

The PC that I wanted to start up has to be on Wi-Fi due to practicality. what I did was get one of those remote controlled smart outlets and set the BIOS to default to power on. I have a UPS and a gas generator so I’m not going to lose power to that PC otherwise. I just shut down the PC as normal then cut the power for about 30 seconds when I want to start it up.

Reply

if the power to the network adapter is off while the computer is off, you need to be able to send a broadcast to it to wake it up.
in order to do that, an always on 3rd party device is needed that is in your home network like a tablet or old phone.
for that i wrote an app called wol proxy for android which can do the broadcast for you and still allow you to wake the PC:

play.google.com/store/apps/details?id=com.bianco.wolproxy&hl=en

Reply
Humberto3 years ago

Hello, i am in brazil! Thanks ( Muito Obrigado!)

Reply

Super !!!!

Thanks a lot…

Reply
freask6 years ago

For Android users – small app to wake up your PC
play.google.com/store/apps/details?id=ru.freask.pcwakeup
Description here develop.freask.ru/android/vklyuchenie-kompyutera-udalyonno-so-smartfona-na-android.html
It works even in cases where the computer behind the router NAT and port forwarding does not work (and it does not help if the PC is turned off).

Reply

thanks

Reply
sam8 years ago

Thanks a lot for providing the information!
I really needed something like this so that I could manage turning on my desktop when I am in college, and fetching necessary files.
Cheers!

Reply

This is exactly what I was looking for for years. Thanks Raymond.

Reply
amala rangnekar9 years ago

Excellent work! :)
We have been trying to implement this technology for our college project, and this article of yours was indeed helpful. :)

Reply

thank you i just recently know about wake on lan

Reply
ET Jr.9 years ago

one of the best articles i’ve read recently… thank you very much!

Reply

Ha I woke up all my school pcs by this thanks

Reply
Eric10 years ago

Good article! I tested a WOL for my Asus system and it worked like a charm. Saved me driving an hour to turn the PC on!

Cheers!

Reply

You are just a genius ….

Jeez….crazy

Reply
kapil10 years ago

wow friend damn good, great for guys like me (net administrators)

Reply

excellent ! & Thanks

Remote Wake Up 1 2 0 160

Reply
Eunos11 years ago

Hi Raymond, this is really helpful. I was about to get a timer hardware to switch my office computer on and off at set timings. My only problem was I need to turn it on at times when the hardware is set to “off”. Have racked my brains over this…until I read what you’ve posted. A million thanks!

Reply

Thanks my friend, your post was of great help. It saved me a lot of money. I was going to buy a remote power switch and “ATX push to on” from Deltronix. Thanks again.

Reply
Peter12 years ago

Very informative, thank you so much! I’ve been looking for a way to turn my computer on from school + use logmein =)

1/2 Fraction

Reply

Hi, Ray
You are a great man.

Reply
mono_maister12 years ago

WHAT A NICE THING!!!! YOU JUST SAVE ME LOT WORK HOURS, because someone have lost the keys of the server’s room, I had to work remotly, but, for a mistake turned off the server, but, I was able to turn it on again with the software Fusion WOL, thanks a lot for your advise.

Reply

Nice article, I already use VNC to control my machine but sometimes I forget to leave my PC on. This will help a lot, the only thing I need now is a decent router which supports dynDNS.

Reply
Eddiet2012 years ago

Very cool!!! I used the wake up from the internet entered my home IP and MAC addy from my office and Voila! My home computer turned on. I used a remote support proggy to turn computer off and access everything THANKS!!!!!

Reply

Great Post Buddy.
I blog it in my blog.
Thanks….

Reply
veki13 years ago

1:2 Ratio

cool, thanks Ray!!

Reply

very helpful way Raymond good work

160Reply
RIOTOUS13 years ago

Remote Wake Up 1 2 0 42

Well Mr Raymond,
Your site is really the Top!
I’ll be nearly 1 Year that I’m here as a member on this BLOG!
I’m really proud to be a member of Raymond blog.
Thanks for all!

Reply

Leave a Reply